Features
Vehicle
The Hatsuta EG-502 is a 3-wheeler ride-on sprayer designed with a compact body (length 2630mm and width 1660mm) for easy maneuverability around narrow greens with a turning radius of 2.7m.
The front tire is equipped with Hatsuta original polyurethane tire and the rear with non-patterned rubber tires that work easy on the greens.
Dry weight ground pressure: Front 0.801kg/cm² & rear at 0.659 kg/cm²
Full load ground pressure: Front: 1.027kg/cm² & rear at 1.202 kg/cm
Features
Durable 500 liters polyethylene spray tank.
tank lid
Tank lid open
A versatile centrifugal pump that can operates between low and high spray volume without compromising the operating speed. Maximum flow rate at 290 l/min
An adjusting metering valve maintains a consistence preset spray pressure when operating single boom section or all 3 boom sections
An original Hatsuta designed 3-section boom with 18 nozzle turrets. A lower spray height as compared to other competitions at 330mm that minimize wind influence and spray drift.
An electric rewind hose reel with 30m of Ø13mm spray hose attached with a Hatsuta original “Super Flat Spray Gun” for easy spraying by hand
Option：turf marker
As a guide for the spraying area, the foam can be dropped to reduce spray spots.
※Turf marker dedicated nozzle
※Turf marker body
※Turf marker fluid tank
Flat fan nozzle + boomless flat fan nozzle
It can be sprayed over a wide area without the use of a boom.
Flat Fan Nozzle
Spray width 5M
Spray rate 150-250㏄/㎡ (at a speed of 5 km/h)
Boomless flat fan nozzle
Spray width 8-10M (when both are injected)
Spray rate 75-100㏄/㎡ (at a speed of 5 km/h)
Wide flat nozzle Spray image
Boomless flat fan nozzle Spray image
